Tests voltage and continuity at the float switch and motor. Confirms whether the pump is getting power.
Sump pump repair Lakeland FL done right the first time
When your sump pump quits, water wins. Our sump pump repair Lakeland FL service restores float switches, motors, and discharge lines so your basement or crawlspace stays dry. We serve homeowners across Polk County, from Dixieland to Christina.
Serving Lakeland and nearby areas.
How big is the job?
Major repair
Motor or impeller service; pump may be pulled for bench work.
- 1. Minor fix Float switch or check valve replacement; pump stays in the pit.
- 2. Major repair Motor or impeller service; pump may be pulled for bench work.
- 3. Full replacement Pump, pit, and discharge line replaced; planned in writing first.
Drag the needle to compareTouch and drag the needle
- 30Services from one local team
- 20Areas served around Lakeland
- Test firstWe verify the fault before quoting.
- Stock partsCommon floats and valves on every truck.
What our sump pump repair includes
Every sump pump repair includes a full diagnostic, the repair itself, and a post-repair test. We'll also check your discharge line and check valve at no extra charge.

Work order
Sump Pump Repair- Full diagnostic: We test the float switch, motor, impeller, and check valve. We also inspect the discharge line for clogs or freezing. You get a clear explanation of what failed and why.
- Float switch repair: If your float is stuck or waterlogged, we clean or replace it. We carry replacements for Zoeller, Liberty, and Wayne pumps on our trucks.
- Motor and impeller service: If the motor hums but doesn't pump, the impeller may be clogged. We clear debris and test the motor under load. If it's burned out, we replace the pump.
- Discharge line check: We verify the discharge line is clear and slopes away from the foundation. If it's clogged, we clear it with a drain snake or hydro jetting machine.
- Post-repair test: We fill the pit with water and watch the pump cycle. The float should trigger at the right level, and the pump should empty the pit in under a minute.
What the first visit covers
First visit
We test the float, motor, and discharge line, then explain what failed and what it takes to fix it.
Sump pump repair for homes
We fix sump pumps in basements, crawlspaces, and utility rooms across Lakeland.
Stuck float
Pump won't start or runs constantly.
Clogged impeller
Pump runs but moves no water.
Leaking discharge
Water sprays from a loose fitting.
Burned-out motor
Pump hums but doesn't turn.

Sump pump repair for businesses
We repair sump pumps in commercial buildings, warehouses, and retail spaces.
Retail spaces
Keep sales floors dry during storms.
Warehouses
Protect inventory from groundwater.
Restaurants
Prevent flooding in food storage areas.
Sump pump repair Lakeland FL: what it involves
A sump pump is the first line of defense against groundwater. Fixing it properly protects your foundation, your air quality, and your wallet.
Sump pump repair Lakeland FL means diagnosing and fixing the pump that keeps groundwater out of your basement or crawlspace. We test the float switch, check the check valve, inspect the discharge line for clogs or freezing, and test the motor under load. If the pump runs but doesn't move water, the impeller may be clogged or worn. If it won't start, the float or switch is often the culprit. We carry replacement floats, switches, and pumps on every truck so most repairs finish in one visit.
Lakeland's flat terrain and high water table make sump pumps essential, especially in low-lying neighborhoods like Dixieland and Lake Morton. After heavy summer storms, groundwater rises fast, and a failed pump can flood a crawlspace in hours. We see plenty of sump pump not working repair Lakeland calls after a power flicker leaves the float stuck. If you're searching for sump pump repair near me in Lakeland FL, we're local and ready to help.

- What it is
- Repair of the pump, float, or discharge line.
- When it helps
- When the pump won't run or won't move water.
- What you get
- A tested pump and a dry pit.
Our sump pump repair process
We keep it simple: find the fault, fix it, and prove it works.
Tools and methods we use
Each method answers a different question. Together they leave very little to guess.
Checks discharge pressure to verify the pump is moving water at the expected rate.
Clears clogs in the discharge line that can cause the pump to short-cycle.
Blasts away heavy debris or mineral buildup in discharge lines that a snake can't clear.
Loosens and tightens fittings on the discharge line and check valve.
When to call for sump pump repair
Your sump pump won't turn on after a power outage.
We test the float switch and GFCI outlet. If the switch is stuck, we clean or replace it.
HomesYou hear the pump running but no water is discharging.
We inspect the impeller and check valve. A clogged impeller is common after years of service.
HomesYour pump runs constantly, even when the pit is empty.
We check the float switch for sticking and the check valve for a bad seal.
HomesYou notice water pooling around the sump pit after a storm.
We inspect the pit, discharge line, and foundation drainage. If the pump is undersized, we recommend a higher-capacity replacement.
Homes
How sump pump repair works in Lakeland
Lakeland's flat terrain and high water table make sump pumps a necessity, not a luxury. In neighborhoods like Dixieland and Lake Morton, the water table can sit just a few feet below the surface. After a heavy summer storm, groundwater rises fast.
Dixieland
Older homes with original sump pits often need float switch upgrades. The high water table here means pumps run frequently.
Lake Morton
Properties near the lake have constant groundwater pressure. We often install higher-capacity pumps for these homes.
South Lakeland
Newer construction with finished basements. We check discharge lines for proper slope to prevent freezing in winter.

- Dixieland
- Lake Morton
- South Lakeland
- Cleveland Heights
From problem to finished result.
Slide to compare the photo with an illustrative inspection view. It is generated from the photo, not a measurement.
PhotoStuck float switch in Dixieland
Before: A homeowner in Dixieland called after their sump pump stopped running. The pit was full, and water was within inches of the crawlspace floor. The float switch was stuck in the down position.
After: We replaced the float switch and tested the pump. The pit emptied in 45 seconds. The homeowner avoided a flooded crawlspace and costly mold remediation.
Clogged impeller in Lake Morton
Before: A Lake Morton homeowner heard the pump running but saw no water discharging. The impeller was clogged with debris, causing the motor to overheat and shut down.
After: We pulled the pump, cleared the impeller, and replaced the check valve. The pump now moves 30 gallons per minute, and the pit stays dry.
Frozen discharge line in South Lakeland
Before: After a winter freeze, a South Lakeland home's sump pump ran but couldn't push water outside. The discharge line was frozen because it lacked proper slope.
After: We thawed the line, re-sloped it, and insulated the exposed section. The pump now discharges properly, even in freezing temperatures.
Common sump pump problems we solve
These are the issues we see most often in Lakeland.
Pump runs but doesn't move water
The impeller may be clogged or the check valve stuck. Water backs up into the pit and can flood your crawlspace.
Pump won't turn on
A stuck float switch or tripped GFCI is often the cause. Without a working pump, groundwater rises fast during storms.
Pump runs constantly
A stuck float or a check valve that won't seal causes short-cycling. The motor overheats and burns out prematurely.
Pump leaks at the discharge
A loose fitting or cracked pipe can spray water every time the pump runs, causing mold and structural damage.
Why fix your sump pump now
A failed sump pump can turn a dry basement into a moldy mess in one storm. These are the outcomes our customers care about most.
Stop water damage fast
A sump pump that won't run leaves groundwater nowhere to go.
Avoid mold and mildew
Standing water in a crawlspace breeds mold within 24 to 48 hours. Fixing the pump quickly prevents that.
Extend pump lifespan
A worn float switch or clogged impeller makes the motor work harder and shortens its life.
Keep your foundation dry
Constant moisture around a slab can lead to cracks and costly foundation repairs. A working sump pump moves water away from the house.
Sump pump repair pricing
A float switch replacement is on the lower end. A motor or pump replacement costs more.
Included
Quoted after a first look
- Full diagnostic
- Float switch repair
- Motor and impeller service
- Discharge line check
What changes the scope
Quoted after a first look
- Part needed
- Pump accessibility
- Discharge line condition
- Emergency vs. scheduled
What you receive
Clear records you can keep and share.
Diagnostic findings
A clear explanation of what failed.
Repair record
Parts replaced and tests performed.
Maintenance tips
How to test your pump monthly.
16 years fixing Lakeland sump pumps
Lakeland Swancrest Plumbing has been repairing sump pumps since 2010.

Float level
We check where the float triggers the pump and adjust if needed.
Amp draw
We measure motor amps to spot a failing pump before it quits.
Discharge slope
We verify the line slopes away from the foundation to prevent freezing.
Do we cover your street?
Type your ZIP code or town. If yours is not listed, call and ask.
Lakeland ZIP codes
- 33813
- 33803
- 33801
- 33805
- 33815
- 33811
- 33802
- 33804
- 33806
Towns we serve.
Based in Lakeland and covering the places around it. Pick one for local details.
What Lakeland homeowners say
Our sump pump quit during a storm, and water was rising in the crawlspace. Lakeland Swancrest came out same day and replaced the float switch. The tech showed me the old part and explained why it failed. Pump's been running fine for months.
I called because my sump pump was running nonstop. They found a stuck check valve and a clogged discharge line. Fixed both in about two hours. Price was exactly what they quoted. No surprises.
We manage several rentals, and sump pump issues are common. Lakeland Swancrest is our go-to. They're fast, professional, and always explain the repair. Their flat-rate pricing makes budgeting easy.
Frequently Asked Questions
Short answers for the first few minutes. The team can cover the rest.
Describe what you are seeing and we will point you to the right next step.
(863) 445-7111A float switch replacement is on the lower end. A motor or pump replacement costs more. We give you a flat-rate price before we start, so you know the total.
The most common cause is a stuck float switch, often after a power flicker or debris in the pit. Other culprits include a clogged impeller, a tripped GFCI outlet, or a burned-out motor. We diagnose the exact fault on-site and fix it the same day.
Yes. We repair or replace float switches on most submersible and pedestal pumps. If the switch is stuck, we clean it. If it's cracked or waterlogged, we swap it. We carry replacements for Zoeller, Liberty, and Wayne pumps on our trucks.
If your pump is under 7 years old and the motor runs, a repair usually makes sense. If it's older, runs hot, or has a cracked housing, replacement is the better call. We'll show you the test results and let you decide. No pressure.
Need sump pump repair Lakeland FL today?
(863) 445-7111Call now for same-day sump pump repair in Lakeland, Florida. We'll diagnose the problem and give you a flat-rate price before we start.
Call or message us
Call (863) 445-7111 any time for emergency plumbing, or send a message and we will get back to you the same business day. Our office is open Monday through Friday, 8 a.m. Tell us what you are seeing and we will tell you what it likely is and what it takes to fix it.






